Cognitive Solutions A776, B780 Select receipt or slip for printing slip for MICR read, 1B 63 33 n

Chapter 5: Programming commands  39

Select receipt or slip for printing; slip for MICR read

ASCII	ESC c 0 n
Hexadecimal	1B 63 30 n
Decimal	27 99 48 n
Value of n:	1, 2, 3	Receipt selected
	4	Slip selected

8Validation station selected

Default of n: 1

Selects the station for printing. When slip is selected, the printer waits for the paper to be inserted. When slip has already been selected and the selection is changed, the form is opened.

If the station has already been selected and it is re-selected, no action takes place.

Slip waiting time is configurable using the configuration menu and the wait time appears on the Diagnostic menu printout

Exceptions

Receiving the command discards unprinted data in the buffer, forcing a “beginning of line” state.

When n is out of range this command is ignored.

Select receipt or slip for setting line spacing

ASCII	ESC c 1 n
Hexadecimal	1B 63 31 n
Decimal	27 99 49 n
Value of n:	1, 2, 3	Select receipt
	4	Select Slip

8Select validation

Default of n: 1

Selects which station receives the effects of the following commands:

1.Select Default Line Spacing (1B 32)

2.Set Line Spacing (1B 33)

3.Add n extra dot rows (16 n)

Exceptions

This command is ignored if n is out of range.

Select paper sensors to output paper end signals

ASCII	ESC c 3 n
Hexadecimal	1B 63 33 n
Decimal	27 99 51 n

This command is ignored.

A776-PG00001 C 12/09 A776 (B780) Programming Guide