Cognitive Solutions A776, B780 manual Set Page Mode Margin Mechanical Adjustment

Chapter 3: Migrating to a new printer 13

Set Page Mode Margin Mechanical Adjustment

Code (Hexadecimal)

1F 03 25 16 n

·This command applies to both the A776 and the B780, although it is primarily implemented for B780 printers replacing existing A721 printers to match cashier check printing.

·Default is 0.

·Value is printed on the second diagnostic page.

·Ranges for margin configurations:

Margin Setting	Maximum mechanical adjustment
.5”	30 half dots
.3”	56 half dots
.1”	84 half dots

·Mechanical adjustment does not apply when page size is defined to be greater than the default of 200 full dots wide.

Select A776 Slip Eject Option

Code (Hexadecimal)

1F 03 25 17 n

n	Slip Eject
00	disabled
01	enabled (default)

. When enabled, the A776 will eject slip and validation transactions out the top of the printer, like the B780. The slip LED will blink to remove the form, also like the B780.

·Option can be disabled for applications that rely on the A760/A758/A756 slip eject out the bottom front position.

Select 45/60 Column Slip Option

Code (Hexadecimal)

1F 03 25 18 n

n	45/60 Column Slip Option
00	disabled (default)
01	enabled

Set Page Mode Option to Trim Full Dots

Code (Hexadecimal)

1F 03 2F n

n < 128 # of full dots trimmed from right side n = 255 compress to fit in 3.024”

. This command applies to both the A776 and the B780, although it is primarily implemented for applications specifying a page size greater than 242 full dots wide.

· Default is no trim.

· Maximum width that can be compressed to fit in 3.024” is 270 full dots. · Value is printed on second diagnostic page.

A776-PG00001 C 12/09 A776 (B780) Programming Guide