Compaq GS80, GS160, GS320 manual Special Characters for SRM Console

Table 7–3 Special Characters for SRM Console

Character

Return or

Enter

Backslash (\)

Delete

Ctrl/A

Ctrl/B or up-arrow

Ctrl/C

Left-arrow

Ctrl/E

Ctrl/F or right-arrow

Ctrl/H

Backspace

Ctrl/J

Ctrl/O

Function

Terminates a command line. No action is taken on a command until it is terminated. If no characters are entered and this key is pressed, the console just redisplays the prompt.

Continues a command on the next line. Must be the last character on the line to be continued.

Deletes the previous character.

Toggles between insert and overstrike modes. The default is overstrike.

Recalls previous command or commands. The last 16 commands are stored in the recall buffer.

Terminates the process that is running. Clears Ctrl/S; resumes output suspended by Ctrl/O. When entered as part of a command line, deletes the current line. Ctrl/C has no effect as part of a binary data stream.

Moves the cursor left one position.

Moves the cursor to the end of the line.

Moves the cursor right one position.

Moves the cursor to the beginning of the line.

Deletes ones character.

Deletes the previous word.

Stops output to the console device for the current command. Toggles between enable and disable. The output can be reenabled by other means as well: when the console prompts for a command, issues an error message, or enters program mode, or when Ctrl/P is entered.

Continued on next page

Operation 7-5