Compaq GS80, GS160, GS320 manual SRM Environment Variables for COM1

8.6SRM Environment Variables for COM1

Several SRM environment variables allow you to set up the COM1 port for use with the SCM. Default values are read from shared RAM and set to whatever the SCM values are at console boot time.

com1_baud	Sets the baud rate of the COM1 port and the modem
	port. The default is 57600 for the local port and the
	modem port. Other allowable baud rates are: 38400,
	19200, 9600, 7200, 4800, 3600, and 2400.
com1_flow	Specifies the flow control on the serial port. The
	default is software. Other values include hardware,
	none, and both.
com1_mode	Specifies the COM1 data flow paths so that data
	either flows through the SCM or bypasses it. This
	environment variable can be set from either the SRM
	or the SCM. The default value is through. Other
	values are local, snoop, soft bypass, and firm
	bypass.
com1_modem	Specifies to the operating system whether or not a
	modem is present.

Using the System Control Manager 8-13