Compaq GS160, GS80, GS320 manual SCM Commands

Table 8–1 SCM Commands (Continued)

Command

Set modem_baud Set dial

Set local_baud

Set com1_baud Set hp_count

Set hp_qbb_maskx

Set init

Set password

Show csb

Show fru

Show nvr

Show status

Show system

Test alert

Description

Sets the modem baud rate.

Sets the string to be used by the SCM to dial out when an alert condition occurs.

Sets the baud rate of the SCM-to-local console device UART.

Sets the baud rate to the SCM-to-system UART.

Defines the number of hard partitions in system.

Sets a value that creates a binary mask in which a bit set to 1 indicates that a QBB belongs to a partition x.

Assigns the modem initialization string appropriate for the dial-out modem at the system site.

Defines the password to be used by the remote user when dialing into the system.

Displays a list of all known nodes on the console serial bus.

Displays information on field-replaceable units (FRUs).

Displays additional nonvolatile environment variables.

Displays SCM status and information.

Displays an overall system summary, including the most recent system self-test results and the current temperature and voltage readings.

Tests the modem setup and connection to the remote pager or computer.

Using the System Control Manager 8-15