Removal and Replacement Procedures

5.3Preparing the Computer for Disassembly

Perform the following steps before disassembling the computer. Consult the computer Hardware Guide for instructions on the following steps:

1.Turn off the computer.

2.Disconnect the AC Adapter and all external devices.

3.Remove the battery pack.

4.Remove the hard drive.

5.Remove the Media Bay device.

5.4Computer Feet

The computer feet are adhesive-backed rubber pads. The computer feet are included in the Miscellaneous Plastics Kit (spare part number 239039-001). Refer to Figure 5-2 for the computer feet locations.

Figure 5-2. Replacing the Computer Feet

5–4

Maintenance and Service Guide

Page 70
Image 70
Compaq N150 manual Preparing the Computer for Disassembly, Computer Feet