
Removal and Replacement Procedures
5.13 Display Lid Switch Board
The display lid switch board is included in the Cable Kit (spare part number
1. Prepare the computer for disassembly (Section 5.3) and remove the following components:
a. Hinge covers (Section 5.5)
b. Keyboard (Section 5.6)
c. Display (Section 5.7)
d. EMI shield (Section 5.8)
e. Top cover (Section 5.9)
2. Turn the top cover bottom side up with the front facing you.
3. Remove the silver M1 × 4.0 screw that secures the display lid switch board to the top cover
4. Remove the display lid switch board from the top cover.
Figure 5-16. Removing the Display Lid Switch Board
Reverse the above procedure to install the display lid switch board.
Maintenance and Service Guide |