Compaq N150 manual Reverse the above procedure to install the display

Removal and Replacement Procedures

5. Remove the display.

To ensure proper alignment of the display during replacement, loosely install the screws in the , , , sequence indicated in

￿Figure 5-6. Tighten the screws after￿￿all￿four￿have been been loosely installed.

After tightening the display screws, tuck the display cable into the

slot in the base enclosure.

￿

Figure 5-6. Installing the Display Screws

Reverse the above procedure to install the display.

Maintenance and Service Guide 5–9