Compaq N150 manual Remove the two pewter M2.5 × 7.0 screws that secure

Removal and Replacement Procedures

3. Remove the two pewter M2.5 × 7.0 screws that secure the

4.Lift up the back edge of the keyboard and swing￿it up and forward until it rests on the top cover.

5.Release the￿zero insertion force (ZIF) connector to which the keyboard cable is connected and disconnect the￿keyboard cable ￿.keyboard to the top cover (Figure 5-4).

Figure 5-4. Removing the Keyboard

6. Remove the keyboard.

Reverse the above procedure to install the keyboard.

Maintenance and Service Guide 5–7