Compaq N150 manual Board to the base enclosure

Removal and Replacement Procedures

2.	Disconnect the infrared board cable	from the system board
	(Figure 5-18).
3.	Remove the infrared board cable from the metal clip
	through which it is routed.	￿
4.	Remove the black M2 × 4.0 screw	that secures the infrared
	board to the base enclosure.
5.	Lift the infrared board ￿out of the￿base￿enclosure.

Figure 5-18. Removing the Infrared Board

Reverse the above procedure to install the infrared board.

Maintenance and Service Guide 5–27