Removal and Replacement Procedures

6. Lift up the front edge of the system board until the board and the battery connector are clear of the base enclosure (Figure 5-21).

ÄCAUTION: When removing the system board, make sure the

battery connector is carefully routed out of the opening

in the

￿

 

￿

base enclosure in which it rests. Failure to follow this caution can

result in damage to the battery connector.￿

￿

 

Figure 5-21.Lifting the System Board

Maintenance and Service Guide

5–31

Page 97
Image 97
Compaq N150 manual Lifting the System Board