WARNING: Improper installation may result in equipment damage or personal injury.
●Always maintain a safe ground. Follow the safe grounding procedures in the wiring diagram pack- age. Ground the shielded cable inside the Input/Output enclosure only.
●Do not operate the equipment at power levels other than those specified on the the equipment data plate.
The B32 Input/Output enclosure should be mounted on a wall, or other secure vertical surface, at a height providing easy access and a clear view of the touchscreen panel.
1 Bolt the control to the
mounting surface. Use the mounting brackets on the I/O enclosure.
2 Ground the control enclosure.
Connect a ground wire to the control. Follow procedures outlined by your regional electrical codes and the wiring diagrams included with this manual.
UGC007/0702 | Basic 32 Loader Control | INSTALLATION |