The program can be restored to the plant configuration if for some reason the program has been interrupted.
To restore the program:
1 Use the Up/Down arrows to scroll to
Loader Config.
2 Press the Enter arrow.
The Loader Configuration screen displays. Use the up/down arrows to scroll to Save Config
3 Press the Enter arrow.
The Save Configuration screen displays. Use the scroll up/down buttons to select Program Mode.
4 Press the Enter arrow to save the change.
5 Press the Previous button to return to
the last screen you were viewing, or the Main button to return to the Main screen.
RESTORING THE PROGRAM
UGC007/0702 | RESTORING THE PROGRAM | APPENDIX B1 |