You may need to change loader settings whenever you change materials or to obtain the best conveying performance.
To configure loaders from the main screen:
1 Use the Up/Down arrows to scroll to
Loader Config.
2 Press the Enter arrow.
The Loader Configuration screen displays. Use the up/down arrows to scroll to Option Config.
3 Press the Enter arrow.
The Option Configuration screen displays. Use the up/down arrows to increase and decrease the loader 
number. Use the scroll down/up buttons to select option:
●Discharge
●Ratio
●Ratio with Calc
●Purge
●Material valve
●No option
4 Press the Enter arrow to save the change.
5 Press the Previous button to return to
the last screen you were viewing, or the Main button to return to the Main screen.
OPERATION | Basic 32 Loader Control | UGC007/0702 |