BACKING UPPLC PROGRAM(OPTIONAL)

To back up the PLC program and save the configuration:

1 Use the Up/Down arrows to scroll to

Loader Config.

2 Press the Enter arrow.

The Loader Configuration screen displays. Use the up/down arrows to scroll to Save Config.

3 Press the Enter arrow.

The Save Configuration screen displays. Use the up/down arrows to scroll to Program Mode

4 Press the Enter arrow.

The Program Mode screen displays. Use the up/down arrows to to select Save to EEPROM. The screen displays message when transfer is complete.

5 Use the Up/Down arrows to select

Run Mode.

NOTE: All pumps must be disabled to save the configura- tion. This insures that all putputs are turned off.

6 Press the Enter arrow to save the change.

7 Press the Previous button to return to

the last screen you were viewing, or the Main button to return to the Main screen.

4-10

OPERATION

Basic 32 Loader Control

UGC007/0702