CONNECTINGMAIN POWERTO THE B32
The B32 Input/Output enclosure is equipped with a three- prong plug and power cord. Each optional remote touchscreen panel also has its own plug and power cord.
1 Plug the power cord(s) into a grounded 115
VAC outlet rated for at least 15 Amp service.
2 Make sure the control enclosure is grounded.
WARNING: Electrical shock hazard
Failure to provide proper grounding can cause control malfunctions and could result in personal injury from electrical shock.
The control must be connected to a grounded power source. A properly sized conductive ground wire must be connected to the chassis ground terminal inside the Input/Output enclo- sure.
INSTALLATION | Basic 32 Loader Control | UGC007/0702 |