Error | Advisory Message | Description | Fault | Recommended Action | ||
Code |
|
|
| Classification |
|
|
(Hex) |
|
|
|
|
|
|
|
|
|
|
|
|
|
xx8B(1)(2) | EXPANSION I/O | • | Either an expansion I/O power | • | Correct the user program to eliminate a | |
| POWER SUPPLY |
| supply is configured in the user |
|
| power supply that is not present |
| CONFIGURATION |
| program, but no power supply is |
| • | |
| MISMATCH ERROR | • | present, or |
|
| the Run mode, or |
|
| an expansion I/O power supply is |
| • With power removed, add the missing | ||
|
|
| configured in the user program |
|
| power supply. |
|
|
| and a power supply is physically |
|
|
|
|
|
| present, but the types do not |
|
|
|
|
|
| match. |
|
|
|
|
|
|
|
|
| |
xx8C(1)(2) | EXPANSION I/O | An expansion I/O object (i.e. cable, | • | Correct the user program I/O configuration | ||
| OBJECT TYPE | power supply, or module) in the user |
|
| so that the object types match the actual | |
| MISMATCH | program I/O configuration is not the |
|
| configuration, and | |
|
| same object type as is physically |
| • | ||
|
| present. |
|
| the Run mode. Or | |
|
|
|
|
| • Correct the actual configuration to match | |
|
|
|
|
|
| the user program I/O configuration. |
|
|
|
|
| • | Cycle power. |
|
|
|
|
| ||
0x1F39 | INVALID STRING | The first word of string data contains | Recoverable | Check the first word of the string data | ||
| LENGTH(3) | a negative, zero, or value greater |
| element for invalid values and correct the | ||
|
| than 82. |
| data. | ||
(1)xx indicates module number. If xx = 0, problem cannot be traced to a specific module.
(2)The xx in this error code means that the error occurs at the location of the last properly configured Expansion I/O module +1. You should use this information in conjunction with the specific error code to determine the source of the problem.
(3)Applies to MicroLogix 1500
Basic 32 Loader Control UGC007/0702