When a conveying problem occurs, the screen displays the alarm message and the audible alarm sounds.
To silence the alarm and fix the problem:
1 Press the Enter button.
This acknowledges the alarm. The alarm text is removed from the screen. The screen returns to the Main screen. NOTE: pressing the Enter button only acknowledges the alarm; it does not fix the problem.
2 View Alarm list.
From the Main screen use the Up/Down arrows to scroll to Loader Settings. Press Enter. The Loader Settings screen displays.
3 Use the Up/Down arrows to scroll to
Alarm List. Press Enter to display alarms. The alarm list displays up to 25 alarms, starting with the most current. All acknowledged alarms have a check mark
next to the text. All alarms show the hour, minute and second the alarm occurred. Alarms are automatically removed from the list when the condition is corrected.
4 Fix the problem.
Refer to the diagnostic tables in this section and any manuals supplied with this device to determine the cause of the problem and to repair the problem.
5 Press Main button to return to main screen
or the Previous button to return to the last screen viewed.
TROUBLESHOOTING Basic 32 Loader Control | UGC007/0702 |