You may need to change loader and pump assignments to match the conveying system vacuum and XXXX
To assign loaders and pumps from the main screen:
1 Use the Up/Down arrows to scroll to
Loader Config.
2 Press the Enter arrow.
The Loader Configuration screen displays. Use the up/down arrows to scroll to Pump Assign.
3 Press the Enter arrow.
The Pump Assignment screen displays. Use the up/down arrows to choose the loader number. Use the scroll down/up buttons to choose the pump number.
4 Press the Enter arrow to save the change.
5 Press the Previous button to return to
the last screen you were viewing, or the Main button to return to the Main screen.
ASSIGNINGLOADERS AND
PUMPS
UGC007/0702 | Basic 32 Loader Control | OPERATION |