| Conceptronic C300BRS4 | User Manual |
|
| L2TP Parameters | Description | |
|
|
| |
| IP Address | The IP address that will be assigned to your router for this connection, | |
|
| as stated by your ISP. | |
| Subnet Mask | The IP address of the corresponding Subnet Mask, as stated to you by | |
|
| your ISP. | |
| ISP Gateway Address | The IP address of the gateway device, as stated to you by your ISP. | |
| DNS | Enter the Domain Name Server IP address. | |
| Server IP | The IP address of your ISP’s server computer, as stated to you by your | |
|
| ISP. | |
| User Name | The account name of the L2PT account that has been assigned to you | |
|
| by your ISP. | |
| Password | The password of the L2PT account that was supplied to you by your | |
|
| ISP. | |
| Retype Password | Retype the password that was entered in the L2PT field. Ensure that | |
|
| these two passwords are identical or an error will occur. | |
| Maximum Idle Time | A value of 0 means that the PPP connection will remain connected. If | |
|
| your network account is billed according to the amount of time the | |
|
| Router is actually connected to the Internet, enter an appropriate Idle | |
|
| Time value (in minutes). This will disconnect the Router after the | |
|
| WAN connection has been idle for the amount of time specified. | |
| MTU | The Maximum Transmission Unit size may be changed if you want to | |
|
| optimize efficiency for uploading data through the WAN interface. The | |
|
| default setting (1400 bytes) should be suitable for most users. Some | |
|
| user may want to adjust the setting to optimize performance for | |
|
| wireless traffic or when low latency is desired (such as with Internet | |
|
| gaming). It is highly recommended that the user research how | |
|
| adjusting the MTU may affect network traffic for better or worse. | |
| Connect mode select | Select the desired option: Always on, Manual, or Connect on demand. | |
|
| Most users will want to choose the default connection setting, Always | |
|
| on. | |
43
