Conceptronic C300BRS4 | User Manual |
4.Leave the MTU value at the default setting (default = 1500) unless you have specific reasons to change this (see table below).
5.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.
6.The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and reboot the Router, click on the Tools button in the top menu and select the System button in the left menu. In the System Management window, click the Save button under Save Settings to Local Hard Drive and then click the Reboot button to reboot the C300BRS4.
7.The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.
Additional settings for Static IP Address connections:
Static IP Parameters | Description |
IP Address | This is the permanent global IP address for your account. This is the |
| address that is visible outside your private network. Get this from your |
| ISP. |
Subnet Mask | This is the Subnet mask for the WAN interface. Get this from your ISP. |
ISP Gateway Address | This is the IP address of your ISP’s Gateway router. It provides the |
| connection to the Router for IP routed traffic that is outside your ISP’s |
| network. That is, this will be the primary connection from the Router |
| to most of the Internet. Get this IP address from your ISP. |
MAC Address | To use the Clone MAC Address feature, enter a MAC address in this |
| field and then click the Clone MAC Address button. |
Primary DNS Address | This is the IP address of the first choice for Domain Name Service |
| (DNS) used to match the named URL web address used by most |
| browsers with the actual global IP address used for a web server. |
| Usually this will be a server owned by the ISP. Get this IP address from |
| your ISP. |
Secondary DNS Address | This is the second choice for a DNS server. Get this IP address from |
| your ISP. |
MTU | The Maximum Transmission Unit size may be changed if you want to |
| optimize efficiency for uploading data through the WAN interface. The |
| default setting (1500 bytes) should be suitable for most users. Some |
| user may want to adjust the setting to optimize performance for |
| wireless traffic or when low latency is desired (such as with Internet |
| gaming). It is highly recommended that the user research how |
| adjusting the MTU may affect network traffic for better or worse. |
|
|
34
