Conceptronic C300BRS4 PPPoE/PPPoA Parameters, Description, User Name, Password, IP Address

Conceptronic C300BRS4 User Manual

5.Choose the desired Connect mode select setting. Select from: Always on, Manual, or Connect on demand. Most users will want to choose the default connection setting, Always on.

6.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.

7.The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and reboot the Router, click on the Tools directory tab and then click the System button. In the System Settings window, click the Save button under Save Settings to Local Hard Drive and then click the Reboot button under Reboot the CONCEPTRONIC C300BRS4.

8.The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.

Additional settings for PPPoE/PPPoA connections:

PPPoE/PPPoA Parameters	Description
User Name	For PPP connections, a User Name and Password are used to identify
	and verify your account to the ISP. Enter the User Name for your ADSL
	service account. User names and passwords are case-sensitive, so
	enter this information exactly as given to you by your ISP.
Password	Together with the User Name, this is used to verify your account to
	the ISP. Enter the Password exactly as given to you by your ISP.
MTU	The Maximum Transmission Unit size may be changed if you want to
	optimize efficiency for uploading data through the WAN interface. The
	default setting (1492 bytes) should be suitable for most users. Some
	user may want to adjust the setting to optimize performance for
	wireless traffic or when low latency is desired (such as with Internet
	gaming). It is highly recommended that the user research how
	adjusting the MTU may affect network traffic for better or worse.
IP Address	If you have selected the Static PPPoE option, type in the global IP
	address used for your WAN interface. Your ISP should provide this IP
	address to you.
MAC Address	To use the Clone MAC Address feature, enter a MAC address in this
	field and then click the Clone MAC Address button.
Primary DNS	Enter the Primary DNS Address. This information should be provided to
	you by your Internet Service Provider.
Maximum Idle Time	A value of 0 means that the PPP connection will remain connected. If
	your network account is billed according to the amount of time the
	Router is actually connected to the Internet, enter an appropriate Idle
	Time value (in minutes). This will disconnect the Router after the
	WAN connection has been idle for the amount of time specified.

38