Connect Tech Blue Heat/Net Sync User Manual
5. Cannot obtain an operating system | This will occur when any of the enabled | Check network |
image (uClinux) to run. | boot sources (flash or BOOTP/TFTP or | connections, server |
| TFTP) fail to obtain a valid compressed | computer or your unit's |
| operating system image to run. | settings. |
|
| This error occurs if TFTP |
|
| booting is enabled and the |
|
| Blue Heat/Net Sync |
|
| cannot download the file |
|
| from the server. |
|
| Contact Connect Tech if it |
|
| persists. |
6. Unexpected return from the uClinux | This error occurs if the operating system | See corrective action for |
operating system. | returns back to the loader. | error code 1. |
|
|
|
7. CDS | Certain CDS items are updated during | See corrective action for |
| the bootup. If a failure occurs during the | error code 1. |
|
| |
| will occur. |
|
|
|
|
8. Boot count could not be incremented | This error is usually caused by a Flash | Contact |
in flash memory | memory failure. | Connect Tech. |
|
|
|
9. No ports found | This message usually indicates a UART | Contact |
| component failure. | Connect Tech. |
|
|
|
20 | Revision 0.03 |
