COOLING UNIT MAINTENANCE

PERIODIC CLEANING

Periodically wash all external surfaces of Cooling Unit, rinse with clean water, then wipe dry with a clean soft cloth. DO NOT USE ABRASIVE TYPE CLEANERS.

CLEANING CONDENSER COIL

Cooling Unit Equipped With Condenser Coil and Air Filter.

(see Figure 5)

CAUTION: Air filter on back of Cooling Unit must be removed and cleaned every 30 days. Excessive accumulation of dust, lint, and grease on air filter will restrict air flow through the Unit and cause refrigeration system to overheat

Condenser coil air intake filter on back of Cooling Unit may either be removed and washed out with detergent solution or may be vacuumed in place on Unit.

Remote Condenser Coil and Fan Assembly (If applicable).

see Figure 6

CAUTION: The Remote Condenser Coil and Fan Assembly condenser coil must be cleaned every 30 days. Circulating air, required to cool the coil, is drawn in at bottom and is exhausted out through top of unit. Failure to clean condenser coil will cause refrigeration

system to overheat.

1.Disconnect electrical power to Cooling Unit at disconnect switch.

2.Clean bottom side of condenser coil using vacuum cleaner, whisk broom, or soft-bristle brush to remove any debris from coil.

3.Check and make sure fan blade moves freely and are not touching any surfaces, are not bent, or out of balance. Check and make sure wire guard is properly installed and securely fastened.

4.Check and make sure roof area immediately surrounding unit is free and clear of any debris that may have collected such as leaves, paper, trash, etc.

5.Restore electrical power to Cooling Unit at disconnect switch.

CHECKING ICE WATER BATH

(see applicable Figure 5 or 6)

A gurgle heard from Cooling Unit indicates water level in water tank is low. This indicates the water tank water level float control is not operating properly and must be repaired or replaced. If a continuous trickle of water is coming out of the water tank overflow tube, this indicates the water level float control is not shutting off properly and must be repaired or replaced. Ice water bath and ice bank should be checked for cleanliness and water tank coils and the water level float control should be checked for excessive mineral deposit build-up as follows:

300381000

20

Page 24 Page 26
Page 25
Image 25
Cornelius 000, 10 installation manual Periodic Cleaning, Cleaning Condenser Coil, Checking ICE Water Bath
Page 24 Page 26

000, 10 specifications

Cornelius 10,000 PLUS is a pioneering innovation in the beverage dispensing industry, designed to cater to the evolving needs of commercial establishments. This advanced system combines state-of-the-art technology with user-friendly features, making it a standout choice for restaurants, cafes, and bars aiming to enhance their beverage service.

One of the main features of the Cornelius 10,000 PLUS is its impressive capacity. With the ability to dispense a wide variety of beverages, including soft drinks, cocktails, and craft beers, the system supports a large volume of service, perfect for high-demand environments. The modular design allows for easy expansion, enabling businesses to add additional flavors or beverages as needed without major overhauls.

The technology behind the Cornelius 10,000 PLUS is equally impressive. It utilizes advanced cooling technology to ensure that beverages are served at the optimal temperature, enhancing the customer experience. The integrated touchless dispensing mechanism minimizes waste and ensures a hygienic experience, addressing growing concerns about cleanliness in food service environments. This technology also improves speed, allowing staff to serve customers more efficiently.

Another key characteristic of the Cornelius 10,000 PLUS is its digital integration capabilities. The system can be connected to a central management platform that tracks sales, inventory levels, and maintenance needs in real-time. This allows operators to optimize their beverage offerings based on customer preferences and reduces downtime through proactive maintenance alerts.

In addition to its performance features, the Cornelius 10,000 PLUS is designed with sustainability in mind. The system employs energy-efficient practices, reducing its environmental footprint while lowering operational costs. The materials used in construction are durable yet eco-friendly, ensuring longevity and less waste.

Overall, the Cornelius 10,000 PLUS stands out as an essential tool for any business looking to elevate its beverage service. With its combination of high capacity, cutting-edge technology, and sustainability features, it not only meets the demands of today’s fast-paced service environments but also positions establishments for future growth and success.
Top Page Image Contents