1.Disconnect electrical power from Cooling Unit at disconnect switch.

2.Remove two screws securing Cooling Unit top cover, then remove cover.

3.Using flashlight, inspect ice water bath and ice bank for cleanliness, ice water bath should be clear and ice bank free of foreign particles.

4.If cleaning of water tank is necessary, refer to CHANGING ICE WATER BATH in this section.

5.Fill water tank with clean water until water starts flowing from water tank overflow hose. USE LOW MINERAL CONTENT WATER WHERE A LOCAL WATER PROBLEM EXISTS.

6.Install Cooling Unit top cover and secure with two screws.

7.Restore electrical power to Cooling Unit at disconnect switch.

CHANGING ICE WATER BATH

(see Figures 5 or 6)

1.Disconnect electrical power from Cooling Unit at disconnect switch.

2.Close shutoff valve in plain water inlet supply line.

3.Remove two screws securing the Cooling Unit top cover, then remove the cover.

4.Make sure end of water tank drain hose is routed to the floor drain, then remove plug from end of hose and allow water to drain from water tank.

CAUTION: Never use an ice pick or other instrument to remove ice from evaporator coils. Such practice can result in punctured refrigeration circuit.

5.Allow ice bank to melt. Hot water may be used to speed melting.

6.Thoroughly rinse inside of water tank with clean water.

7.Install plug in end of water tank drain hose.

8.Open shutoff valve in plain water inlet supply line. Due to slow water fill rate of the water level float control, the water tank may be hand filled until water runs out of the overflow tube. USE LOW MINERAL CONTENT WATER WHERE A LOCAL WATER PROBLEM EXISTS.

9.Install Cooling Unit top cover and secure with two screws.

10. Connect electrical power to Cooling Unit at disconnect switch.

WATER PUMP YEARLY MAINTENANCE (OR AFTER WATER SYSTEM DISRUPTIONS)

WARNING: The carbonators water inlet strainer screens, double liquid check valves, and carbonated water tanks water outlet lines single check valves, must be inspected and serviced at least once a year under normal circumstances, and after any disruptions

(plumbing work, earthquake, etc.) to the water supply system that might cause turbulent (erratic) flow of water through system. Water pump with no screen or defective screen in the strainer would allow foreign particles to foul the liquid double check valve. CO2 gas could then back flow into water system and create a health hazard in water system.

21

300381000

Page 25 Page 27
Page 26
Image 26
Cornelius 10, 000 installation manual Changing ICE Water Bath
Page 25 Page 27

000, 10 specifications

Cornelius 10,000 PLUS is a pioneering innovation in the beverage dispensing industry, designed to cater to the evolving needs of commercial establishments. This advanced system combines state-of-the-art technology with user-friendly features, making it a standout choice for restaurants, cafes, and bars aiming to enhance their beverage service.

One of the main features of the Cornelius 10,000 PLUS is its impressive capacity. With the ability to dispense a wide variety of beverages, including soft drinks, cocktails, and craft beers, the system supports a large volume of service, perfect for high-demand environments. The modular design allows for easy expansion, enabling businesses to add additional flavors or beverages as needed without major overhauls.

The technology behind the Cornelius 10,000 PLUS is equally impressive. It utilizes advanced cooling technology to ensure that beverages are served at the optimal temperature, enhancing the customer experience. The integrated touchless dispensing mechanism minimizes waste and ensures a hygienic experience, addressing growing concerns about cleanliness in food service environments. This technology also improves speed, allowing staff to serve customers more efficiently.

Another key characteristic of the Cornelius 10,000 PLUS is its digital integration capabilities. The system can be connected to a central management platform that tracks sales, inventory levels, and maintenance needs in real-time. This allows operators to optimize their beverage offerings based on customer preferences and reduces downtime through proactive maintenance alerts.

In addition to its performance features, the Cornelius 10,000 PLUS is designed with sustainability in mind. The system employs energy-efficient practices, reducing its environmental footprint while lowering operational costs. The materials used in construction are durable yet eco-friendly, ensuring longevity and less waste.

Overall, the Cornelius 10,000 PLUS stands out as an essential tool for any business looking to elevate its beverage service. With its combination of high capacity, cutting-edge technology, and sustainability features, it not only meets the demands of today’s fast-paced service environments but also positions establishments for future growth and success.
Top Page Image Contents