GENERAL MAINTENANCE

A WARNING: When servicing, use only identical

Craftsman replacement pads. Use of any other part may create a hazard or cause product damage.

A WARNING: To prevent accidental starting that could cause possible serious personal injury, turn off the saw with the switch on the arm, remove the switch key, and unplug the saw before working on the radial saw.

Remove sawdust from the work area, including inside the blade cover, frequently.

Remove sawdust from and clean the blade guards frequently.

Clean plastic parts with a soft damp cloth. Do not use any strong solvents.

,_, WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating

oils, etc. contact plastic pads. They contain Chemicals that can damage, weaken or destroy

plastic.

Check teeth of anti-kickback pawls; sharpen with file if needed.

Regularly check all nuts, bolts, screws, and cables for tightness and condition.

MOTOR/ELECTRICAL

Frequently vacuum or blow out any sawdust from the work areas.

_1= WARNING: If the power cords are worn, cut, or damaged in any way, have them replaced

immediately by a qualified service technician at a Sears store or repair center. Failure to do so could result in sedous personal injury.

,_ WARNING: To avoid fire or electrocution, reassemble electdc parts only with identical

Craftsman replacement parts. Reassemble exactly as odginaily assembled.

CRAFTSMAN'RADIALSAW 315.220380

54

Page 54
Image 54
Craftsman 315.22038 owner manual General Maintenance, Motor/Electrical