PROBLEM
Saw blade tends to push wood to one side when cross cutting.
CAUSE | SOLUTION | ||
1. | Blade is heeling. | 1. | See Squaring the Blade to the |
|
|
| Fence in Adjustments section. |
2. | Column tube is loose in column | 2. | See Adjusting the Column |
| support. |
| Tube in Assembly section. |
3. | Arm is loose or misaligned. | 3. | See Setting the Arm Lock |
|
|
| Wheel in the Assembly section. |
4. | Fence/tables are not straight. | 4. | Check with square; sand or |
|
|
| replace. |
5. | Blade or teeth are bent or dull. | 5. | Sharpen or replace the blade. |
|
|
| See the removal procedure in |
Assembly section.
59-(RRFT$14RN"RADIALSAW315.220380
