Cybex 445T Treadmill Owner’s Manual
Electrical Power Requirements
The power requirements for this treadmill are a grounded, dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz and 20 amps; 220 VAC, 60 Hz, 12 amps or 230 VAC ±5%, 50 Hz and 12 amps. Contact your electrician to ensure the power supply complies with local building codes.
Do not use a ground plug adapter to adapt the
Assembling the Treadmill
!WARNING: Use extreme caution when assembling the treadmill. Failure to do so could result in injury.
!CAUTION: A minimum of two people are required to assemble this treadmill.
Tools Required
•9/16” Socket wrench with a 4” extension
•Phillips head screwdriver
NOTE: The words “left” and “right” denote the treadmill user’s orientation.
1. Read and understand all instructions thoroughly before assembling the treadmill.
NOTE: Each step number in the assembly instructions tells you what you will be doing. The lettered steps following each step number describe the procedure required. Do not continue with step 2 until you have carefully read all of the assembly instructions.
2.Verify you have received the correct package.
A.Read the sticker on the outside of the box and verify that the model number, color and voltage are what you ordered. NOTE: During step 3 and 5 you will verify that the contents of the box match the sticker.
3.Unpack and verify the contents of the boxes.
A.Lift up and remove the cardboard sleeve that surrounds the treadmill.
B.Check to be sure that the following items are present. Check off ( 
) each item as you find it. See Figure 1. If any of the parts are missing contact Cybex Customer Service.
Setup and Assembly Page
