Cybex International CX-445T manual Attach the motor cover three pieces, #16

Cybex 445T Treadmill Owner’s Manual
D. Check to see that all of the cables	Console
are connected firmly in their proper
	Assembly
place. See Figure 8.
E. While being sure not to pinch	Back
any cables, use a Philips head	Cover
screwdriver to secure the seven
screws 8-16 x .50” (#14) that hold
the console assembly (#2) to the
console back (#4). See Figure 9.	Screws
F. Using a Philips head screwdriver
secure the two screws (#13)
securing the console assembly (#2)

to the upright assembly (#3). See Figure 9.

Figure 9

G. Using a Philips head screwdriver	Console
	Assembly
secure the two screws (#14)
securing the console back cover	Console
(#5) to the console front (#4). See	Back
Figure 10.

9. Attach the motor cover (three pieces).

A. Using a Phillips head	Screws
screwdriver, partially tighten each
motor cover side (left and right)
with four screws, 10-32 x .75”	Upright
(#16). See Figure 10.	Assembly
	Machine Screw

B.Place the motor cover center (#6)

into position. See Figure 11.

Figure 10

C.Using a Phillips head screwdriver, finish tightening all four screws. Be sure the screws are securing the motor cover’s tabs.

	#6
	#16
	#8
	#7
	#16
Setup	Figure 11
and
Assembly
Page 5-8