Cybex 445T Treadmill Owner’s Manual
!CAUTION: A minimum of two people are required to lift, move and assemble this treadmill. Always use proper lifting methods when moving heavy items.
4.Lift and move the treadmill.
A.At least two people should lift and move the treadmill to a level location where you intend to leave it. Use proper lifting methods.
5.Verify the model and voltage.
A.Verify that you have the correct model and voltage by looking at the serial number label located at the rear of the unit..
6.Install the upright assembly.
A.Locate the upright assembly (#3) and six bolts,
NOTE: Do not pinch or damage display cable when installing upright assembly.
B.Carefully place the upright assembly (#3) on the base assembly (#1) as shown. See Figure 3.
C.Plug the display cable, located at the bottom of the upright assembly (#3) into the base assembly (#1). See Figure 3.
D.Carefully lift the upright assembly (#3) into the proper location. See Figure 4.
E.Using a 9/16” socket wrench, secure the upright assembly (#3) to the base assembly (#1) with six bolts,
#3 |
Display |
Cable |
#1 |
Figure 3
#3 |
|
#15 | #15 |
| |
#15 |
|
#1 |
|
Figure 4
Setup
and
Assembly
Page
