Cybex International CX-445T manual Install the console assembly to the console back

Cybex 445T Treadmill Owner’s Manual

NOTE: If installing the A/V option, refer to the 445T A/V bracket installation instructions (supplied with the A/V bracket).

8.Install the console assembly to the console back.

A.Locate the console assembly (#2), two screws, 8-32 x .38” (#13) and nine screws 8-16 x .50” (#14).

B.Place the console assembly (#2) in position on the console back (#4). See Figure 7.

#2

#4

Figure 7

C.Connect these cables into the display board: the display cable (2 connectors), the contact heart rate cable and the ground wire. See Figure 8.

Display

Cable

(2 Connectors)

Ground

Wire

Contact

Heart Rate

Cable

Figure 8	Setup
	and
	Assembly
	Page 5-7