
Using the Configuration Menu | |
|
|
Home > WAN (PPPoE)
PPPoE:
User Name:
Verify Password:
Service Name:
IP Address:
Network Mask:
Maximum Idle Time:
MTU:
Connection Mode Select:
Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.)
Your PPPoE username provided by your ISP.
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.
The network mask of the PPPoE interface.
The Maximum Idle Time value is only used for the On Demand connection mode. It specifies how many minutes the WAN connection can be idle before the connection is dropped. A value of zero means the connection will not be dropped due to idle time.
Maximum Transmission
Typically, connections such as PPPoE, PPTP, and L2TP are not always on. The router allows you to set the connection mode. The settings are:
Always on: A connection to the Internet is always maintained.
Connect on demand: A connection to the Internet is made as needed; and the connection is dropped after “Maximum Idle Time” minutes of no activity.
Manual: You have to open up the
23 |