Using the Configuration Menu | |
|
|
Advanced > Port Forwarding
Port forwarding is used to open a port or a range of ports in your router and redirect data through to these ports to a single PC on your network.
Click the Enabled or Disabled radio button.
Name:
IP Address:
TCP Ports to Open:
UDP Ports to Open:
Firewall Rule:
Schedule:
Enter a name for your port forwarding rule.
Enter the IP address of the computer or device you want to forward the ports to.
Enter the TCP ports to open. You may enter a single port or a range of ports
Enter the UDP ports to open.
Select to Allow or Deny (block) the ports.
The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled.
35 |
