Using the Configuration Menu | |
|
|
Advanced > Virtual Server (continued)
Virtual Server: Name:
Private IP:
Protocol Type: Private Port:
Public Port:
Firewall Rule:
Schedule:
Example #1:
Select Enabled or Disabled.
Enter the name referencing the virtual service.
The server computer in the LAN (Local Area Network) that will be providing the virtual services.
The protocol used for the virtual service.
The port number of the service used by the Private IP computer.
The port number on the WAN (Wide Area Network) side that will be used to access the virtual service.
Select to Allow or Deny.
The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled.
If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP.
Name: FTP Server Private IP: 192.168.0.30 Protocol Type: TCP Private Port: 21
Public Port: 2100
Schedule: From: 01:00AM to 01:00AM, Sat to Sun
All Internet users who want to access this FTP Server must connect to it from port 2100. This is an example of port redirection and can be useful in cases where there are many of the same servers on the LAN network.
33 |
