Fast Ethernet Switching System User’s Guide

TFTP

TFTP is done using Telnet. It can be done from a remote location using a TFTP server. The TFTP server and the DES-5200 must be on the same subnet. For example, if the IP address of the DES-5200 is 100.100.100.001 then the TFTP server must have an IP address beginning with 100.100.100. Only the last three digits will be unique to the server and the DES-5200. Remember that two devices cannot have the same IP address.

Follow these steps to update software using TFTP.

1.Verify the download mode is TFTP. Use the space bar to toggle between XMODEM and TFTP.

2.Enter the Internet Protocol (IP) address of the TFTP server.

3.Enter the complete path and filename of the software and select Execute, Figure 32.

4.When the transfer is complete, Figure 33, reset the DES-5200 for the changes to take effect.

Figure 32: TFTP Transfer

Managing the DES-5200

55

Page 62
Image 62
D-Link DES-5200 manual Tftp