
Fast Ethernet Switching System User’s Guide
Create New Trunking Port
The Create New Trunking Port panel, displayed in Figure 46, is used to create Trunk Ports. You can create up to seven trunking groups with up to eight ports in each group. Each Trunking Group acts like a single port. The trunking speed is 800 Mbps in half duplex and 1.6 gigabits in full duplex. Trunk group1 has been created as an example. Your screen may look different.
Figure 46: Create New Trunking Port
New Trunking Group Name
Is the name of the Trunking Group you are going to create. All Trunking Groups must have a name.
Port #
Is the number of the port. The numbers on the panel match the ports on the DES- 5200.
Name
This field identifies the TrunkGroup that the port has been assigned to. The field is open if the port has not been assigned to a TrunkGroup.
Status
The status field can be either available or selected. Available indicates that the port is available for inclusion in a TrunkGroup. Selected indicates the port has been assigned to a TrunkGroup. In use indicates a port is part of a trunk group.
Managing the | 81 |