DI-308 ISDN Remote Router
•IP Address – This is the IP Address of the device that the router will attempt to reach. The router will check its routing table and try to locate the IP Address.
•Count – The number of pings (packets) that will be sent. A value of 0 will cause pings to be sent continuously.
•Delay (10ms) – The amount of time in 10 millisecond intervals between each ping in the Count.
•Start Ping Test - Press <Enter> or <Return> to begin the test.
Loopback Test
The loopback test is used to test the path ISDN network between your phone company’s switch and the router.
90
