D-Link DI-308 manual Plugging in All Devices

DI-308 ISDN Remote Router

•Choose the Telnet/Discovery Enable option to enable Telnet if it has not been done so already.

•Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new settings.

•Choose Exit in the submenus to return to the Main Menu.

The router can now be accessed via the LAN by Telnet, the Web-based DI-308 Router Configuration Utility (included with the router) and other SNMP management applications.

If you have any questions regarding the settings you made or other settings in the submenus, please refer to the next chapter, “Configuration and Management.”

Step 9 – Plugging in All Devices

You can now plug in and power on all other devices connected to the router. Then power on the router.

The router is now able to use the LAN ports.

The router must be further configured in order to get the built-in ISDN modem to function properly, to perform other routing functions, and to manage your IP network. This can now be done by using the console, the included Web-based Configuration Utility or Telnet.

For more information about configuring or managing the router, please refer to the next chapter, “Configuration and Management.”

15