D-Link manual Installation, The DI-308 Front Panel, Ordering Your ISDN Line

DI-308 ISDN Remote Router

Installation

This chapter outlines how to connect your DI-308 to your LAN and ISDN line. Refer to the diagrams below to identify all of the ports on your device when you make connections.

Ordering Your ISDN Line

If you do not have an ISDN line installed already, we suggest that you order it from your telephone company as soon as possible to avoid the long waiting period common when ordering a new line. Use the information in this section to place the order. If you have already installed your ISDN line, you can check the following section to make sure that you can use all the features of your DI-308.

1.Contact your local telephone company’s ISDN Ordering Center.

2.Make sure DSS1 switches are available since these are the only switch types currently supported by the DI-308.

3.When the telephone company installs your ISDN line, be sure to obtain the following information:

◊ISDN switch type.

◊ISDN telephone number(s).

The DI-308 Front Panel

Names and descriptions of your router’s front panel LEDs are given below:

POWER— Comes on as soon as you connect the router to the power adapter and plug the power adapter into a suitable AC outlet.

TEST— Should be blinking if the router is functioning properly.

ISDN – LINK— Indicates that the router has an ISDN line connected to the ISDN interface and it has been successfully initialized.

ISDN – B1 and B2— On if there is an active ISDN session on that channel or if that channel is making or receiving a call.

6