LINK/ACT— 1 through 8— These indicators light up when a port is connected to a
100/10M – 1 through 8— These indicators light up when a port is operating at 100Mbps. Otherwise, if this indicator is dark and the corresponding LINK indicator is lit, then the port is operating at 10Mbps.
PHONE – 1— Lights up when standard phone port 1 is in use.
PHONE – 2— Lights up when standard phone port 2 is in use.
The DI-308 Rear Panel
POWER — This socket is an 18 volt, 750mA power input jack. If the power adapter included with the router has been lost or misplaced, please ensure that the replacement adapter meets both the voltage and amperage requirements.
CONSOLE – This
PHONE 1 and 2 – These normal telephone jacks can be used to connect telephones or fax machines to the router for use over the ISDN lines. Plug telephone devices into these jacks as you normally would into a telephone wall socket.
ISDN – This socket is used to connect the ISDN line to either an
ETHERNET – The eight Ethernet ports function as a normal, dual speed NWay Ethernet switch.
•Uplink – This port is used to connect the router to another switch or hub using a
•Ports 1x to 8x – These eight ports can be used to connect
7
