D-Link DSL-522T manual Rear Panel Connections, Connect network cables

DSL-522T ADSL Router User Guide

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router. Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the reset button).

Connect network cables:

1.Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable to your telephone line.

2.Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Router and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.

ADSL Port

Use the ADSL cable to

connect to the your telephone

line (RJ-11 port)

Ethernet Port	Power Insert
Use the Ethernet port	Use the adapter
to connect the Router	shipped with the
to your Ethernet LAN	Router to connect to
or computer	power source

USB Port	Reset Button
Connect USB cable here	To manually reset, depress
and install USB driver	button with the power on
	for at least seven seconds

4