Information you will need from your ADSL service provider:
| This is the Username used to log on to your ADSL service | Record info here |
Username | provider’s network. It is commonly in the form − |
|
user@isp.co.uk. Your ADSL service provider uses this to |
| |
|
| |
| identify your account. |
|
|
|
|
| This is the Password used, in conjunction with the Username |
|
Password | above, to log on to your ADSL service provider’s network. |
|
| This is used to verify the identity of your account. |
|
|
|
|
| These settings describe the method your ADSL service |
|
| provider uses to transport data between the Internet and your |
|
| computer. Most users will use the default settings. You may |
|
| need to specify one of the following WAN Setting and |
|
| Connection Type configurations (Connection Type settings |
|
| listed in parenthesis): |
|
WAN Setting / | PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA |
|
Bridge Mode (1483 Bridged IP LLC or |
| |
|
| |
Connection Type | 1483 Bridged IP |
|
| Static IP Address (Bridged IP LLC, 1483 Bridged IP |
|
| 1483 Routed IP LLC, 1483 Routed IP |
|
| Dynamic IP Address (1483 Bridged IP LLC or |
|
| 1483 Bridged IP |
|
| Default = PPPoE/PPPoA (PPPoE LLC) |
|
|
|
|
| Most users will not be required to change this setting. The |
|
| Virtual Path Identifier (VPI) is used in conjunction with the |
|
| Virtual Channel Identifier (VCI) to identify the data path |
|
| between your ADSL service provider’s network and your |
|
VPI | computer. If you are setting up the Router for multiple virtual |
|
connections, you will need to configure the VPI and VCI as |
| |
|
| |
| instructed by your ADSL service provider for the additional |
|
| connections. This setting can be changed in the WAN |
|
| Settings window of the web management interface. Default |
|
| value = 8 |
|
|
|
|
| Most users will not be required to change this setting. The |
|
| Virtual Channel Identifier (VCI) used in conjunction with the |
|
| VPI to identify the data path between your ADSL service |
|
VCI | provider’s network and your computer. If you are setting up |
|
the Router for multiple virtual connections, you will need to |
| |
| configure the VPI and VCI as instructed by your ADSL |
|
| service provider for the additional connections. This setting |
|
| can be changed in the WAN Settings window of the web |
|
| management interface. Default value = 35 |
|
|
|
|
The Setup Wizard can be used to configure the Internet connection for most users.
Note
vi
