DSL-522T ADSL Router User Guide
ATM VC Settings
ATM VC settings can be configured for all connection types in the WAN configuration menu of the Home directory.
ATM VC Settings in WAN Settings window
The table below describes the ATM VC settings used to configure a PPPoE or PPPoA connection for an ADSL account.
| ATM VC Parameters | Description |
|
|
| The Router supports using up to eight multiple virtual connections. This |
|
|
| window allows the user to configure WAN settings for all the available |
|
|
| connections (see instructions below on how to set up Multiple Virtual |
|
| PVC | Connections). Use the PVC |
|
|
| to Pvc7) you want to configure. Since most users will use only a single |
|
|
| connection, the default setting Pvc0 can be used for any changes made to |
|
|
| the WAN settings. |
|
|
| The Virtual Path Identifier is used with the VCI to define a dedicated circuit |
|
| VPI | on the ATM network portion of the connection to the Internet and WAN. |
|
|
| Most users will not need to change this setting. |
|
|
| The Virtual Channel Identifier is used with the VPI to define a dedicated |
|
| VCI | circuit on the ATM network portion of the connection to the Internet and |
|
|
| WAN. Most users will not need to change this setting. |
|
|
| As with the PVC setting, this is mainly for use by clients who are configuring |
|
| Virtual Circuit | the Router for multiple virtual connections. Use this to enable or disable the |
|
| PVC you are currently configuring. By default, the Pvc0 is Enabled and the |
| |
|
|
| |
|
| remaining PVCs are disabled. |
|
|
|
|
|
30
