![](/images/new-backgrounds/1264386/264386117x1.webp)
DSL-522T ADSL Router User Guide
The parameters described in the table below are used to set up filter rules.
Click the Apply button to put the new rule into effect. Any filter rule configured in the menu will appear in the Filters List with the new settings. The Router must save the new settings and reboot before the new rules are applied.
| Filters Parameter | Description |
|
|
| For an Outbound Filter, this is the IP address or IP addresses on your LAN |
|
|
| for which you are creating the filter rule. For an Inbound Filter, this is the IP |
|
| Source IP | address or IP addresses for which you are creating the filter rule. You can |
|
| opt to indicate a Single IP, an IP Range or Any IP from the |
| |
|
|
| |
|
| Choosing Any IP will apply the rule to all WAN or all LAN IP addresses |
|
|
| depending on which type of rule (Inbound or Outbound) is being configured. |
|
|
| Where the Destination IP address resides also depends on if you are |
|
| Destination IP | configuring an Inbound or Outbound filter rule. You can opt to indicate a |
|
|
| Single IP, an IP Range or Any IP from the |
|
|
| The Source Port is the TCP/UDP port on either the LAN or WAN depending |
|
| Source Port | on if you are configuring an Outbound or Inbound Filter rule. Select one of |
|
| the following options from the |
| |
|
|
| |
|
| Port, Port Range or Safe Range (ports above 1024). |
|
|
| The Destination Port is the TCP/UDP port on either the LAN or WAN |
|
| Destination Port | depending on if you are configuring an Outbound or Inbound Filter rule. |
|
| Select one of the following options from the |
| |
|
|
| |
|
| Port, Single Port, Port Range or Safe Range (ports above 1024). |
|
| Protocol | Select the transport protocol (TCP, UDP or TCP/UDP) that will be used for |
|
| the filter rule. |
| |
|
|
| |
|
| Select to Allow or Deny transport of the data packets according to the |
|
| Action | criteria defined in the rule. Packets that are allowed are routed to their |
|
|
| destination; packets that are denied are blocked. |
|
|
|
|
|
49