Connecting the DSM-320 (continued) Network Connections

Select one of two ways to connect a network to your DSM-320:

RJ-45 Ethernet Connector

Connect the supplied Ethernet cable to the network cable connector, and attach the other end to the network.

• Wireless Antenna

Attach the supplied antenna by threading it onto the antenna connector. Be sure the antenna is secure and in an upright position.

Note: You may have an Ethernet cable plugged into the unit and have the wireless antenna connected. Neither will interfere with the other, but only one network can be accessed at a time (wired or wireless). The network connection type is selected in the Setup Wizard and can be changed by going to the Setup Menu. To access the Setup Menu, press the SETUP button on the remote control.

32

Page 32
Image 32
D-Link manual Connecting the DSM-320 Network Connections, RJ-45 Ethernet Connector