Setup (continued)

General

The General option contains a submenu of four options:

Audio/Video

Aspect ratio: The aspect ratio can be adjusted to match the capture settings of your video clips.

Display mode: Interlace is the default setting. Progressive scan should only be selected if your television or monitor supports this feature.

Video Output: You can select the video output from this screen or by pressing the VIDEO OUT button on the remote control from any screen.

The Composite setting should be selected for composite or S-Video connections. If component connectors are used but not selected, the screen will have a blue tint.

Audio Output: The audio output can be modified from this screen or by pressing the AUDIO OUT button on the remote control from any screen.

If you are playing audio that has been encoded in 5.1 surround then sound is in pass-through mode. This means that you cannot adjust the volume on the remote control or Mute the sound using the remote control. With 5.1 surround audio you must control the volume level from your digital tuner/receiver.

85

Page 85
Image 85
D-Link DSM-320 manual Setup General, Audio/Video