Connecting the DSM-320

All audio, video, and networking connections are located on the rear panel of the DSM-320.

Video Connections

Be sure the PAL/NTSC switch is set to NTSC if you are located in the USA.

Select one of three ways to connect video to your DSM-320:

• Composite Video Connector

Plug the supplied yellow video cable into the DSM-320 and the matching opposite end of the cable to your television input.

S-Video Connector

Plug the supplied S-Video cable into the S-Video connector and the opposite end into the S-Video connector on your television.

• Component Connectors

Match the color coded cables to the matching connectors on the DSM-320 and into the component video input of your television.

Note: This cable is not supplied.

The VIDEO OUT button on the remote control toggles between the composite/S-Video output and the component output. If component connectors are used but not selected, the screen will be tinted blue.

30

Page 30
Image 30
D-Link manual Connecting the DSM-320, Video Connections