The DSM-320 Setup Wizard (continued)

Select Your Network Connection

The connection type defaults to

Wireless.

Wireless

If using a wireless network, press the down arrow on the remote control to navigate to the Next button. Once the Next button is highlighted, press ENTER on the remote control to proceed to the next screen.

Wired

To select Wired, press the ENTER button on the remote control while the Connection is highlighted. Press the up arrow on the remote control to choose Wired. Press ENTER again to make the selection and then press the down arrow on the remote control to navigate to the Next button. Once the Next button is highlighted, press ENTER on the remote control to proceed to the next screen. Skip to the Current Network Settings screen on page 38.

Select the SSID

Select the SSID (network identifier) that is being used by your wireless network. To select an SSID, press ENTER on the remote control while the SSID window is highlighted. Use the up arrow and down arrow buttons on the remote control to navigate through the list. Once you’ve highlighted the correct SSID, press ENTER on the remote control. Press the down

arrow on the remote control to navigate to the Next button.

The Rescan button will refresh the list of available networks. Use the left arrow and right arrow to navigate from the Next button to the Rescan button. If you cannot locate the SSID, select <Manually Enter SSID> and you will be able to enter it on the next screen.

36

Page 36
Image 36
D-Link manual DSM-320 Setup Wizard, Select Your Network Connection