DVG-G5402SP User’s Manual

SETUP

3-1-3 Wireless Setup

This section instructs you how to setup your wireless network on the VoIP Router device.

Setup Hint:

1.Every device in the same wireless network must use the same SSID.

2.To avoid wireless network overlap, a specific and different channel is needed.

3.Make sure security used by every device in the same wireless network is compatible with the wireless AP.

3-1-3-1 Wireless Basic

SETUP -> Wireless Setup -> Wireless Basic

Enable Wireless LAN Interface: Enable wireless basic settings on LAN interface.

Wireless Network Name (SSID): SSID is the name of your wireless network. All wireless-equipped devices share the same SSID to communicate with each other. It must be unique to identify separated wireless network. For security, you should change the default SSID to a special ID.

Wireless Channel: Select a clear and appropriate channel for your wireless network. A device on your wireless network must use a specific channel to transmit and receive data. If wireless network has overlap, change a different channel number.

802.11Mode: The VoIP Router can operate in 2.4GHz ISM band with different speed of wireless connection, Select the wireless band of your network.

802.11b only - Allow all 802.11B compliant wireless devices to associate with the wireless AP. 802.11g only - Allow all 802.11G compliant wireless devices to associate with the wireless AP.

Mixed 802.11g and 802.11b - Allow a mix of both IEEE802.11b and IEEE802.11g compliant wireless devices to associate with the wireless AP.

D-Link Systems, Inc. 25

Page 25
Image 25
D-Link DVG-G5402SP user manual Wireless Setup, Wireless Basic