D-Link DVG-G5402SP user manual Dynamic IP Dhcp Settings, Adsl PPPoE Settings

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR

4-2 IP Configuration Settings—Set the IP Configuration of the WAN Port

Static IP Settings

Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if you have any question.

Function

Select a Static IP

IP address Settings

Subnet Mask Settings

Default Gateway Settings

Save Settings and Restart

Command

yAfter entering IVR mode, dial 114.

yWhen voice prompt plays “Enter value”, dial 1 (to select static IP)

yAfter entering IVR mode, dial 111. When voice prompt plays “Enter value”, enter your IP address followed by “#”.

Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.

yAfter entering IVR mode, dial 112. When voice prompt plays “Enter value”, enter your subnet mask followed by “#”.

Example: If the subnet mask value is 255.255.255.0, dial 255*255*255*0#.

yAfter entering IVR mode, dial 113. When voice prompt plays “Enter value”, enter your default gateway’s IP address followed by “#”.

Example: If the default gateway is 192.168.1.254, dial 192*168*1*254#.

yTo save settings, dial 509 (Save Settings). The system will save the current settings. Please restart the system. Wait for about 40 seconds for the system to restart, and then enter 101 to check whether the IP address was retained. If the system does not play back the IP address after dialing 101, this indicates that the VoIP Router currently is not connected to the Internet. Please check and make sure the cable connections, account numbers, and passwords are correct.

Dynamic IP (DHCP) Settings

After entering IVR mode, dial 114.

When voice prompt plays “Enter value”, dial 2 (to select DHCP).

Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted, press 101 to check whether or not the IP address was retained.

Note: If the system does not play back the IP address, this indicates that the VoIP Router failed to communicate with a DHCP server. Please check with your DHCP server or ISP.

ADSL PPPoE Settings

Note: Complete PPPoE settings should include: Select PPPoE (option 3 of 114), PPPoE account (121) and PPPoE password (122).

Please contact your local Internet Service Provider (ISP) if you have any questions.

D-Link Systems, Inc.

88